Ricoh C211 Service Manual page 261

8. Installing the Ink Cartridge
a. Open the front door and lower
the ink holder.
b. Remove the ink cartridge cap.
c. Insert the ink cartridge into
the ink holder and return the ink
holder to the original position.
d. Close the front door.
9. Idling
a. While holding down the "0" key
on the operation panel, press the
Reset key.
b. If blinks on the operation
panel, repeat the above procedure.
10. Test Printing
a. Adjust the original guide to match
the original size.
b. Set the original face down.
c. Input the desired number of prints
with the number keys and press
the Master Making key.
NOTE: With a new machine, the
master paper misfeed
indicator
because there is no master
yet on the drum. Press the
Reset key, then press
the Master Making key.
d. After one sheet of paper is delivered,
make prints at the lowest print
speed (1) until the print image density
stabilizes. Use a test chart to check
for changes in the image density.
e. Check the copy image after about
one hundred prints.
C216
blinks
3-5 SM