Table of Contents
Advertisement
4. Adjusting The Lower Guide Plate
B]
[B]
Purpose :
To ensure a smooth paper feed excluding paper jams, folds, or wrinkles.
Method :
1. Make sure that the distance between the lower guide plate [A] and the
lower second feed roller [B] is O to 0.1 mm as shown.
2. if incorrect, remove both front and rear covers and loosen the screw [C].
Then, adjust the distance by turning the eccentric nut [D].
3. After adjustment, retighten the screw [C].
5-40
Advertisement
Chapters
Table of Contents
