Original
Command Sheet
1)
2)
HOUR
@@@
i----/<-JP*&
A
B
c
Printed
+
Felt-tip Pen
image using "Fn 8"
(mm)
A
B
c
The designated
areas marked using a pencil are depicted by dashed lines.
This is because the line marked using a pencil is low density and thin,
therefore the designated area is not recognized as a closed loop even if the
line on the command sheet is a closed loop.
Therefore, the designated area can not be memorized,
The designated
area marked using a black felt-tip pen is printed within the
closed loop.
As the line of the designated area on the printed paper is a closed loop, the
designated area is memorized.
4-18