Ricoh C211 Service Manual page 289

Studs
[B]
FRONT VIEW OF FRAME WITH MOUNTING HARDWARE
5. Mount the (4) short Studs [B] into the chassis.
6. Attach one end of the short I/O Ribbon Cable [C] to the connector,
CN406 on the Image Processing Board [E]. Refer to figure 2.
Plastic Sheet
[D]
M3 x 6 Screws
Video Interface PCB
[E]
FRONT VIEW OF FRAME WITH INTERFACE PCB
FSM
Studs
[B]
FIGURE 1:
Front Cover Blanket
[F]
CN101
CN102
FIGURE 2:
Main
Control
CN405 PCB
[A]
Ribbon Cable
[C]
Interface Harness
[G]
6-5 VT2105