Optics; Overall - Ricoh C211 Service Manual

2. OPTICS

2.1 OVERALL

The CCD [A] which corresponds to a 300 dpi pixel density is used in the
VT2200.
The light reflected from the original is sent to the CCD through a lens.
The CCD changes the reflected light into an analog electrical signal which
will then be converted into a 4-bit digital data in the A/D conversion PCB will
then convert. The main control PCB changes the 4-bit data into a 1-bit data
to drive the thermal head.
[D]
[C]: Shading Plate
[D]: Mirror
[E]: Exposure Glass
[F]: Fluorescent Lamp
SM
[E]
[F]
[C]
2-3
[B]
T h erm a l H ead
O pe ratio n P an el
[A]
A /D C on versio n
P C B
M ain
C ontrol
P C B
C224