Ricoh C211 Service Manual page 181

9.10 INK SUPPLY SOLENOID POSITION ADJUSTMENT
0.5-1
[A]
[B]
\\
Purpose: To ensure that the clutch sleeve is released by the stopper when the
1.
2,
3.
4.
5.
ink supply solenoid [A] turns on,
Remove the drum unit from the machine,
Remove the front cover of the drum unit.
Press in the solenoid plunger by hand and make sure that the distance
between the stopper [B] and the clutch sleeve [C] is 0,5 mm to 1,0 mm as
shown.
If incorrect, loosen the screw [D] and adjust the distance by moving the
solenoid bracket [E].
After adjustment, retighten the screw [D].
5-69