Ricoh C211 Service Manual page 645

6. Miss Indicator Lights (When the main switch is turned on)
< Phenomenon>
6-1. When the main switch is on, the jam indicator "B" blinks. The jam indicator "B"
cannot be reset even though the Reset key is pressed.
B+$i
<
Possible causes>
1.
Incorrect positioning of the interrupter
[B] prevents the sensor fror
tivated.
\
1 being' ac-
[A]
Iii
w
c Countermeasure>
1.
Adjust the interrupter [B] so that when
the bearing of the printing pressure
release arm has reached the highest
position of the printing pressure cam,
the interrupter [B] blocks the printing
pressure detecting sensor [A].
6-23
Rev. 8189