Ricoh C211 Service Manual page 155

7.5 LOWER GUIDE PLATE ADJUSTMENT
'[B]
'[A]
)=-
[c]
f
I
\\
Ill \Nl
Y
-t- \
[A]
[B]
Purpose: To ensure a smooth paper feed excluding paper jams, folds, or
1,
wrinkles.
Make sure that the distance between the lower guide plate [A] and the lower
second feed roller [B] is O to 0.1 mm as shown.
If incorrect, remove both front and rear covers and loosen the screws [C]on 2.
both sides, Then, adjust the distance by lowering and raising the lower guide
plate,
3. After adjustment, retighten the screws [C],
5-43