Ricoh C211 Service Manual page 613

DELlVERY SECTION
c Adjustment>
1. Adjusting The First Paper Exit Sensor
(ss950)
[c
\ \
Purpose :
Method :
\
To ensure that the sensor detects correct paper delivery and that the jam in-
dicator blinks properly after an exit misfeed or a paper wrap occurs.
1. Remove the front cover of the machine.
2. Place a sheet of 20 lb. paper [B] 30 mm away from the paper exit sensor [A]
and make sure that VRI02 is set at the ON/OFF threshold of LED 103.
3. If incorrect, adjust the sensor sensitivity by turning VRI02 on the main
control PCB [C].
5-73