Ricoh C211 Service Manual page 623

1. Master Miss-Eject
< Phenomenon>
1-1. Master eject motor does not rotate.
< Possible causes>
1. The pressure plate is tilted away from
the horizontal and locked in place due
to a bend in the pressure plate drive
link [A]. Therefore, the master eject
motor [B] is locked and the main con-
trol PCB is damaged.
[A]
< Countermeasure>
1. Correct the form or replace the bent link
which causes the master eject motor to
lock. Replace the master eject motor and
the main control PCB.
6-1