Ricoh C211 Service Manual page 205

3.3 TAPE
CUT LENGTH ADJUSTMENT
Adjustment standard :250 mm *I 5 mm
1. Turn on the main body and the tape dispenser main switches.
2. Press the manual cut switch [A].
NOTE: Do not press the switch longer than 2.5 seconds.
3, Measure the tape length.
If the tape is longer than 250 mm, turn VR2 [B] counterclockwise.
If the tape is shorter than 250 mm, turn VR2 clockwise.
ICAUTION: DO not turn VRI. It is for factory adjustment only.
I
6-7