Ricoh C211 Service Manual page 354

7. Loading Paper on the Paper Feed
Table
a. Open the paper feed table.
b. Stack the paper neatly on the
paper feed table.
c. Position the paper feed side plates
so that they are in light contact with
both sides of the paper.
d. Position the paper delivery table for
the printing paper size, use the
scale on the table.
e. Position the paper delivery side
plate for the printing paper size,
use the scale on the table.
8. Installing the Master Roll
(Type VT-II-M)
a. While lifting the release lever, slide
the scanner unit to the left.
b. Attach a spool onto each end of the
master roll.
c. Set the master roll in the machine.
NOTE: The vinyl side faces down.
d. Return the pressure release lever
to the original position.
e. Plug in the power cord and turn on
the main switch.
f. Press the Master Cut button.
g. Remove the cut master paper.
NOTE: Check that the master paper
is not bent or creased.
h. Close the scanner unit.
C224 3-4 SM