Ricoh C211 Service Manual page 211

VT2MMYVT2500
anlv:
Component Condition Phenomenon
Paper Size Detection
Always ON
* A4: Master making length is 247mm
Sensor 1
(Paper
(B5 lengthwise).
detected)
* LT: Master making length is 10.6"
(LT Ienglhwlse).
.
* A4: Master making length is 172mm
OFF (Paper
(B5 sideways).
not detected)
* LT: Master making length is 8.1"
(HLT Iengthwlse).
.
aaper Size Detection
* A4: Master making length is 172mm
Sensor 2 Always ON
(B5 sideways).
(Paper exists) *
LT: Master making length is 8.1"
(HLT lenglhwlse).
.
* A4: Master making length is 247mm
OFF (Paper
(B5 lengthwise).
not detected)
* LT: Master making length is 10.6"
0 T Ien!!thwise).
.
'aper Size Detection
Always ON
* A4: Master making length is 172mm
sensor 3
(Paper
(B5 sideways).
detected)
* LT: Master making length is 8.1"
[HLT len@hwlse).
.
* A4: Master making length is 287mm
OFF (Paper
(A4 lengthwise),
not detected) *
LT : Master making length is 13.6"
(LG_le@Wse).
Yum Master Detection Master is on the drum: machine
works correctl .
Sensor
$
Master is not on the drum: indicators F and:
Always ON
blink during the master eject process. Printing starts
(Sensor
always
when the Print Start key is pressed, but indicators
detects white)
+
"E", "B", and ~ soon turn on and the machine
stops.
OFF
Master is on the drum: two masters are
(Sensor
wrapped on the drum.
Master is not on the drum: master is wrapped
always
detects black)
correctly on the drum, but the "M" indicator blinks
when the Print Start key ispressed.
* Refer to the next page.
7-5