Ricoh C211 Service Manual page 570

MASTER EJECT SECTION
<Adjustment
>
1. Adjusting The Master Eject Solenoid
[N
/
II
m
Purpose : To ensure that the master is ejected.
Method : 1.
2.
3.
4.
Open the master eject unit and remove the upper cover of the master eject
unit (4 screws).
Confirm that the lower first eject rollers [B] are touching the drum surface by
enabling 1/0 check No. 7 (Output Mode) [A] and also confirm that they are
separated from the drum when releasing the plunger.
If it is out of adjustment, loosen the screws [C] and adjust the mounting
position of the master eject solenoid [A].
After adjustment, retighten the screws [C].
Note:
To easily confirm whether the lower roller touches the drum
surface, wrap the drum with the blank paper, and check the paper
for roller marks.
5-31