Ricoh C211 Service Manual page 355

9. Installing the Ink Cartridge
a. Open the front door and lower the
ink holder.
b. Remove the ink cartridge cap.
c. Insert the ink cartridge into the ink
holder and return the ink holder to
the original position.
d. Close the front door.
10. Idling
a. While holding down the "0" key on
the operation panel, press the
Reset key.
b. If the display message
blinks repeat the above procedure.
11. Test Printing
a. Adjust the original guide to match
the original size.
b. Place an original into the ADF, face
down.
c. Input the desired number of prints
with the number keys and press
the Master Making key.
NOTE: With a new machine, the
master paper misfeed
indicator
because there is no master
on the drum. Press the Reset
key, then press the Master
Making key.
d. After one sheet of paper is
delivered, press the print key to
iniaciate the print cycle. Make the
prints at the lowest print speed (1)
until the print image density
stabilizes. Use a test chart to check
for changes in the image density.
e. Check the copy quality after the
image is stabilized (dry).
SM
+ D
+ F will blink
3-5 C224