Ricoh C211 Service Manual page 763

BULLETIN NUMBER:
APPLICABLE MODEL: VT2130
SUBJECT: PARTS CATALOG UPDATE
GENERAL:
To facilitate servicing, the stepped screw supporting the paper feed pressure lever has been changed to a
combination of a spacer and a Philips screw (M4 x 10). This information should be incorporated into all
existing VT2103 Parts Catalog documentation.
C2035010
OLD PART NO. NEW PART NO.
C2035010
C2095220
03140100Z
* DENOTES NEW ITEM
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft er the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
Old
DESCRIPTION
Lever Shaft
Spacer - 4 x 20 x 6
Philips Screw - M4 x 10
SS830/950/VT2130-042
03140100Z
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
05/24/94
New
C2095220
REFERENCE
QTY INT PAGE
2 0 23
0 2 23
3/S
0 2 23
ITEM
4
4
111*