Ricoh C211 Service Manual page 83

7, Loading Paper on the Paper Feed Table
a.
b.
c,
d.
e.
Open the paper feed table.
Stack the paper neatly on the paper
feed table.
Position the paper feed side plates so
that they lightly contact the paper on
both sides.
Position the paper delivery table for the
printing paper size, using the scale on
the table.
Position the paper delivery side plate
for the printing paper size, using the
scale on the table.
8, Installing the Master Roll
(Type VT-S)
a.
b.
c.
d.
e,
f*
9.
h.
While lifting upon the release lever,
slide the scanner unit to the left.
Attach a spool to each end of the
master roll.
Set the master roll in the machine.
NOTE: The vinyl side faces down.
Return the pressure release lever to
the original position.
Plug in the power cord and turn on the
main switch.
Press the Master Cut button.
Remove the cut master paper.
NOTE: Please confirm that the master
paper is not bent or creased,
Close the scanner unit.
3-13