Ricoh C211 Service Manual page 533

Service Program Table
COUNTER
OUTPUT
INDICATION
0001-0
Turn on
the
drum (1
O rpm)
0002-0
Turn on the drum (30 rpm)
0003-0
Turn on the drum (60 rpm)
0004-0
Turn on the paper table drive motor (up)
0005-0
Turn on the paper table drive motor (down)
0006-0
Turn on the vacuum motor
0007-0
Turn on the master eject solenoid.
0008-0
Turn on the master eject clamper opening solenoid.
0009-0
Turn on the master feed clamper opening solenoid.
0010-0
Turn on the reversing roller solenoid.
0011-0
Turn on the paper feed solenoid and the printing pressure solenoid.
0012-0
Turn on the ink supply solenoid.
0013-0 Turn on the original transport motor
0014-0 Turn on the master feed motor
0015-0
Turn on the fluorescent lamp
0016-0
Master Process Command (Line/Photo)
0017-0 Reverse the master eject motor (Turn the eject rollers)
0018-0 Turn on the master eject motor (Pressure plate up/down)
0019-0
Turn on the cutter motor (Move it from front to rear ----- 950)
(Move it from rear to front ----- 830)
0020-0 Turn on the cutter motor (Move it from rear to front ----- 950)
(Move it from front to rear ----- 830)
0021-0 Turn on the image shifting motor to (+) direction -----950
Turn on the image shifting motor to (-) direction -----830
0022-0
Turn on the image shifting motor to (-) direction -----950
Turn on the image shifting motor to (+) direction -----830
0023-0
Turn on the magnetic counter for paper
0024-0
Turn on the magnetic counter for master
0025-0 Turn on the drum reverse rotation relay
0026-0
Magnification ratio: 100% (LED ON)
0027-0
Magnification ratio : 93% (LED ON)
0028-0
Magnification ratio: 75°/0 (120V) (LED ON)
0029-0
Magnification ratio: 64°/0 (120V) (LED ON)
0030-0 Turn on the drum (10 rpm), the paper feed solenoid and the printing pressure solenoid.
0031-0
Tape marker (option)
0032-0
Turn on the ADF drive motor
0033-0
Turn on the ADF original pressure solenoid
Note :
1) Indication (0001-O to 0006-0 and 0030-0) are not activated when the
safety cover is open.
2) With Indication 0004-0, the paper tray must be in the down position or
damage will result.
4-13