Ricoh C211 Service Manual page 30

NDEX NAME FUNCTION Pto P
No.
LOCATION
Switches
6 Right Cutter Switch Detects when the cutter position is far F-6
right.
17 Left Cutter Switch Detects when the cutter position is far
F-6
left.
21 Master Box Switch Checks whether the master eject box is F-7
installed correctly or not.
(VT2300/2500)
F-6
(VT21 00/2130
/21 50)
29 Master Eject Unit Safety
Checks whether the Master Eject Unit F-4
Switch is closed correctly or not.
45 Master Cut Switch Informs the CPU to cut the master F-8
paper leading edge.
(VT2300/2500)
F-7
(VT21 00/2130
/2150)
46 Scanner Safety Switch Checks whether the scanner unit is F-4
closed correctly or not.
49 Drum Rotation Switch Informs the CPU to rotate the main
A-6
motor at 10 rpm.
50 Front Door Safety Switch Checks whether the Front Door is set F-4
correctly or not.
51 Drum Safety Switch Checks whether the drum unit is set B-6
correctly or not.
58 Paper Table Safety Switch Checks whether the paper table is
F-4
opened correctly or not.
63 Interlock Switch Releases the cover safety functions. F-4
65 Main Switch Turns the power on or off. B-1
68 Full Master Detecting Informs the CPU when the master eject F-7
Switch box is full of masters. (VT2300/2500)
F-6
(vT2100/2130
/21 50)
69 Pressure Plate Position Informs the CPU when the pressure F-7
Switch plate has reached the home position. (VT2300/2500)
F-6
(V-I-2100/21 30
/2150)
70 Memory/Class Switch Selects Memory or Class mode.
C-4
(VT2300/2500
only)