Ricoh C211 Service Manual page 652

9. Table of Defective Electrical Components: SS950
Component Condition
Phenomenon
Paper Feed OFF condition The paper is not fed and jam indicators "B"
Solenoid
+ '~ blink.
Drum Rotation ON condition
The drum begins to rotate when the main
Sensor
(Interrupted)
switch is turned on. E06 lights when the
Master Making key is pressed or when the
Print Start key is pressed.
OFF condition
The drum begins to rotate when the main
(Not interrupted) switch is turned on.
E06 lights when the
Master Making key is pressed or when the
Print Start key is pressed.
Master End Sensor ON condition Normal operation when a master is present.
(Actuated)
Master end is not detected; Master End in-
dicators "C" + ~ do not blink and jam in-
dicators "C" + % blink.
OFF condition Even if the master is present, the Master
(Not actuated) End indicators "C" + ~ blink.
Right Cutter Switch ON condition
The master is not cut. (Cutter unit does not
(Rear) (Feeler is
move at all.)
actuated)
OFF condition When the master button is depressed, in-
(Feeler is not
dicator "E-01" lights. At that time the cutter
actuated)
does not return to the front.
Left Cutter Switch ON condition
The master is cut. (Cutter unit does not return
(Front)
(Feeler is from the rear.)
actuated)
OFF condition When the main switch is turned on, indicator
(Feeler is not "E-01" lights. (Cutter unit attempts to
actuated) reference Home position.) When the master
button is depressed "E-01" lights (master is
cut). If switch fails during machine operation,
"E-01" lights.
6-30
Rev. 8/89