Ricoh C211 Service Manual page 76

Im=ll
1
Paper
"# I
Exit Feed I
~-Front Side '-
20
L
Place two noise absorbers on the optional table.
.
NOTE: Make sure that the noise absorbers are positioned on the table at
the
locations
shown
in the above figure,
3. Mount the machine on the optional table (2 screws--packed with table).
4. Remove the tape and string securing the covers and units as shown above.
a. Open the paper feed tray. Then remove the cushion plate [B] from
the paper feed roller section.
b. Open the master delivery unit. Then remove the tape securing the
paper delivery guide plate.
3-6