Table of Contents
Advertisement
10. Adjusting The Position of the Ink Supply
Solenoid
0.5
Purpose :
To ensure total clutch-sleeve release by the stopper when the ink supply
solenoid [A] turns on and complete clutch-sleeve locking by the stopper
when the ink supply solenoid turns off.
Method :
1. Remove the drum unit from the machine.
2. Remove the front cover of the drum unit.
3. Press in the solenoid plunger by hand and make sure that the distance
between the stopper [B] and the clutch sleeve [C] is 0.5 mm to 1.0 mm
as shown.
4. If incorrect, loosen the screw [D] and adjust the distance by moving the
solenoid bracket [E].
5. After adjustment, retighten the screw [D].
5-68
Advertisement
Chapters
Table of Contents
