Ricoh C211 Service Manual page 540

EXTERIOR COVER REMOVAL
[E
CP"
*
[B]
When adjusting or disassembling each section, refer to the following procedure of how to
remove the exterior cover:
[A] Master feed unit cover (2 screws "a": SS950, "b": SS830). Slide the scanner
unit to the left.
[B] Front cover (6 screws).
* Remove the master feed unit cover [A] to remove the upper right screw.
Open the front door to remove the front screws.
[C] Rear cover (6 screws).
[D] Operation panel cover (6 screws).
* Remove the front cover [B] to remove the operation panel cover.
[E] Front and rear fluorescent lamp covers (2 screws each).
[F] Master eject cover (2 screws).
5-1