Periodic Inspection Table (Every 6 Months) - Ricoh C211 Service Manual

1.3 PERIODIC INSPECTION TABLE (EVERY 6 MONTHS)

Item/Location
Original platen cover
Exposure glass
Mirror/Sub mirror
Platen roller
Sensors
Press roller
Drum surface
Master feed and
delivery
Paper feed and delivery Inspection
Second paper feed
rollers
Original transport rollers Cleaning
ADF
Pull-out roller
Original feed roller
Separation blade
C224
Step
Cleaning Wipe off any stains with a soft cloth dampened
with ethyl alcohol.
Cleaning Wipe with a dry cloth.
Cleaning Use a blower brush.
Cleaning Wipe off paper powder with a cloth dampened
with water.
Inspection Check the performance of all the sensors.
and cleaning Remove stains from sensors with dry cloth.
Cleaning Wipe off the ink and paper powder with cloth
dampened with ethyl alcohol.
Cleaning Wipe off the paper powder and ink which is forced
out from the trailing edges of the masters using a
cloth dampened with ethyl alcohol.
Inspection The master should be properly fed and clamped,
without generation of skew, folding, etc. The
master should also be properly delivered without
jam.
Print several sheets of paper to ensure that paper
is fed smoothly and delivered, without generation
of skew, folds, wrinkles, etc.
Cleaning Wipe off ink and paper powder with a cloth
dampened with alcohol.
Wipe off paper powder with a cloth dampened
with water.
Cleaning Wipe off paper powder with a cloth dampened
with water.
Cleaning Wipe off paper powder with a cloth dampened
with water.
Cleaning Wipe off paper powder with a cloth dampened
with water.
4-2
Inspection Standard
SM