Ricoh C211 Service Manual page 89

7. Idling
a. While holding down the "O"key, press
the Reset key on the operation panel.
b. If ~ ( ~ + D: blinks, press the Reset
key,
8. Test Printing
a.
b.
c.
d.
e.
Adjust the original guide to match the
original size,
Set the original face down.
Input the desired number of prints with
1
Ill
L
D
-at
1
11
the number keys and press the Master
Making key.
NOTE: With a new drum, the master
+ paper misfeed indicator ~
+ F blinks because there is no
master yet on the drum, Press
the Reset key, then press the
Master Making key.
After one sheet of paper is delivered,
press the Print Start key to make prints
at the lowest print speed (1) until the
print image density stabilizes, Use a
test chart to check the image density.
Check the copy image after about one
hundred prints.
3-19