Ricoh C211 Service Manual page 541

No
Good
Good
[G] Front and rear original table frames (3 screws each).
* Remove theoperation panel cover [D]andthe rearcover [C]toremove
the front and rear original table frames.
[H] Original table (6 screws).
* Remove the front and rear original table frames [G] to remove the
original table.
Note: When installing the original table, make sure both original guides
[J] are set in the same position in the grooves (see illustration).
[1] Original table cover (3 screws).
* Slide the scanner unit to the left.
5-2