Ricoh C211 Service Manual page 190

10.1
FIRST PAPER EXIT SENSOR ADJUSTMENT
VT2300~2500 Main Control Board
Purpose :To ensure that the sensor detects correct paper delivery and that the
jam indicator blinks after an exit misfeed or a paper wrap occurs,
1. Remove the front cover from the machine,
2. Place a sheet of 20 lb paper 30 mm above the first paper exit sensor [A] and
make sure that VRI 05 [B] for VT2300/VT2500 (VRl 02 for
VT2100/VT21 30/VT21 50) is set to the ON/OFF threshold of
LED 103 [C].
3. If incorrect, adjust the sensor sensitivity by turning VRI 05 for
VT2300/VT2500 (VRl 02 for VT21 00/VT21 30/W21 50) on the main control
board [D].
5-78