Priport Controller Operation - Ricoh C211 Service Manual

6.16 PRIPORT CONTROLLER OPERATION

1. Power-On/Power-Off Sequence:
Please follow the steps listed below to turn on and off your system:
Power-On:
Power-Off:
2. Controller - Front Panel Indicator Lights:
-
Power-On Light (left hand light): When light is on, power is on.
-
Ready Light (right hand light)
3. Ready Light:
A. The Controller is ready for operation after the following sequence
occurs:
-
At power on, the ready light remains off for a short time.
-
When ready light turns on, the Controller is ready for use.
B. Ready Light--Slow Flash:
-
When a slow flash occurs, the Controller is processing the document.
C. Ready Light--Quick Flash:
-
When a quick flash occurs, the Controller has encountered an error
condition in processing the document. (See the Troubleshooting
section for possible error conditions and solutions.)
D. Ready Light--One Long + Two Short Flashes:
-
When one long and two short flashes occur, either the Priport is off-line
or the Priport is still waiting to print copies off a new master which is
currently on the drum.
VT2105
1. Computer
2. Priport
3. Controller
1. Controller
2. Priport
3. Computer
6-30 FSM