Ricoh C211 Service Manual page 713

BULLETIN NUMBER 830/950-020
APPLICABLE MODEL SS950 PRIPORTS
SUBJECT: OFFSETTING
SYMPTOM:
Offsetting on rear side of prints.
CAUSE:
The volta e ma be slightly high, even with the voltage adjusted within the spectfication standard (voltage on
decal +O.!to - JlV).
FIELD COUNTERMEASURE:
The use of the 800 master in the SS950 Priports will in most cases eliminate the offsetting effect as the Image
to be reduced to 24.2V - 24.3V to effecttvely minimize offsetting. Refer to page 5-21 of the Field Service
Manual for the thermalhead voltage adjustment procedure.
CUSTOM&R SERVICE GROUP
Support
155 Passaic Avenue, Fairfield, New Jersey, 07004
l
l
l