Ricoh C211 Service Manual page 574

2. Master Eject Belt/Roller
.'
k"
1) Remove the 2 springs [A] on both sides.
2) Remove the upper shaft [B] (2 E-rings).
3) Remove the lower shaft [C] (2 E-rings).
4) Remove the gear [D] (1 E-ring).
5) Remove the gear [E] (1 Hexagon Headless Set Screw).
6) Remove the gear [F] (1 E-ring).
7) Remove the E-rings [G] to pull out both upper (300) and lower rollers
(200) as a set.
8) Remove the Angle [H].
9) Remove the Plate [1].
10) Remove the Belts [J].
11) Remove the Rubber Rollers (300, 200) [K].
5-35