Ricoh C211 Service Manual page 764

BULLETIN NUMBER:
APPLICABLE MODEL: VT2130
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all VT2130 Parts Catalogs. This information should be
incorporated into all existing VT2130 Parts Catalog documentation.
• •
UPDATE NO. 1 -
UNITS AFFECTED:
All VT2130 Priports manufactured after Serial Number C211403XXXX will have the new style Circuit Bre aker
and Bracket installed during production.
OLD PART NEW PART
NO. NO.
C2032059 C2162059
11070134 11070783
11070154 11070782
12081245
12081042
* DENOTES NEW ITEM
• •
UPDATE NO. 2 -
UNITS AFFECTED:
All VT2130 Priports manufactured after Serial Number C211408XXXX will have the new style Relays
installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft er the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
CIRCUIT BREAKER - Due to a vendor change, the following parts have been
changed.
DESCRIPTION
Circuit Breaker Bracket
Circuit Breaker - 5A
(220/240V)
Circuit Breaker - 5A
(110/120V)
Relay - DC24V
Power Relay - DC24V
AC DRIVE BOARD - To improve reliability, the relays (RA303 and RA304) used to
control the Table Drive Motor have been changed.
SS830/950/VT2130-043
QTY
1 1 3
1 1 3
1 1 3
4 2
0 2
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
11/08/94
REFERENCE
INT PAGE
63
"1"
AS
63A
A
SET
63A
75
1 75
ITEM
40
121
121
109
129 *