Ricoh C211 Service Manual page 87

0.
7.
8.
9,
10(
- Remove the small cap in the rear cover of
the main body [A] using a minus screw
driver. Then, mnnect the tape marker
harness [B] to the main body, and install
&
the connector cover [C] using one of
rear cover fixing screws.
[A]
[B]
[c]
Open the tape marker cover [D] and i
stall one roll of tape (accessory). Then,
insert the leading edge of the tape into
Press the tape cut button [G] to cut off
the leading edge of the tape.
Check the tape marker operation using
the Memory/Class modes of the main
body,
3"17