Ricoh C211 Service Manual page 149

6.6 MASTER EJECT BELT/ROLLER REPLACEMENT
')
[F]
1. Remove the master eject unit. (See page 5-36.)
2. Remove the 2 springs
[A]
on
both
sides,
3, Remove the upper shaft [B] (2 E-rings).
4. Remove the lower shaft [C] (2 E-rings).
5. Remove the gear [D] (1 E-ring).
6, Remove the gear [E] (1 Allen Screw).
7. Remove the gear [F] (1 E-ring).
8. Remove the E-rings [G] to pull out both upper (30$) and lower rollers (20$)
as a set.
9. Remove the Angle [H].
10. Remove the Plate [1].
11. Remove the Belts [J].
12. Remove the Rubber Rollers (30@ 20@) [K],
5-37