Ricoh C211 Service Manual page 536

Original
Command Sheet
HOUR
6
+
Printed image using "Fn 8"
(HOUR)
B
c
1) The designated areas marked using a pencil are depicted by dashed lines. This is
because the line marked using a pencil is low density and thin, therefore the desig-
nated area is not recognized as a closed loop even if the line on the command
sheet is a closed loop.
Therefore, the designated area can not be memorized.
2) The designated area marked using a black felt-tip pen is printed within the closed
loop.
As the line of the designated area on the printed paper is a closed loop, the desig-
nated area is memorized.
4-16