Ricoh C211 Service Manual page 113

1. EXTERIOR
1.1 EXTERIOR COVER REPLACEMENT
[c]
/
[B]
When adjusting or disassembling each sections, refer to the following procedure
of how to remove the exterior covers.
[A] Master feed unit cover (2 screws), Slide the scanner unit to the left,
[B] Front cover (6 screws),
Remove master feed unit cover [A] to remove upper right screw. Open the
front door to remove the front screws.
[C] Rear cover (6 screws).
[D] Operation panel cover (6 screws).
Remove front
rover
[B] to remove operation panel cover.
[E] Front and rear fluorescent lamp covers (2 screws each).
[F] Master eject cover (2 screws),
5-1