Ricoh C211 Service Manual page 88

4. INSTALLATION PROCEDURE COLOR
DRUM VT2000 -LG (Option)
10
2.
3.
4.
5.
6.
NOTE: There are three types of color drum units,
Color Drum Type VT2000-LG: For the VT2130
Remove the protective sheet [A] from the
drum unit.
Remove the tape securing the ink holder
[B].
Stick a color indicator seal on the drum
case and the ink holder. The seal must
be the same color as the ink in use.
Remove the drum unit,
a.
b.
Leave the master wrapped around the
dust and drying.
Keep the removed drum unit in the
drum case.
%
Install the color drum unit,
The color drum indicator @ on the
operation panel stays lit when the color
drum is mounted in the machine,
Install the color ink.
a.
b.
removed drum to protect the drum from
Remove the ink cartridge cap.
Insert the ink cartridge into the ink
holder.
3-18