Table of Contents
Advertisement
9. Table of Defective Electrical Components: SS950
Component
Condition
Phenomenon
Master Buckle
ON condition
When main switch is turned on, jam in-
Sensor - SN5
dicators "C" + ~ blink, and it cannot be
reset.
OFF condition
Original feeding and master feeding stops
halfway and jam indicators "C" + ~ blink.
+ 24V (CN504-I
No output
There is no image on the master paper.
and CN504-2 is OV)
+ 24V (CNI03-I
on
No input
When the main switch is turned on, the ADF
Main PCB)
drive motor turns on. -.5 Image position
blinks.
+ 12V (CNI03-2
on
No input
The counter indicator is not displayed (Only
Main PCB)
the reduction and image mode indicators are
displayed.)
+ 5V (CNI03-3
on
No input
No indicators.
Main PCB)
–12V (CNI03-6
on
No input
Machine functions are correct, but when
Main PCB)
the Print Start key is pressed, the add ink
indicators ~ + "D" blink after 20 rotations if
ink is present.
6-32
Rev. 8/89
Advertisement
Chapters
Table of Contents
