Ricoh C211 Service Manual page 260

6. Loading Paper on the Paper Feed
Table.
a. Open the paper feed table.
b. Stack the paper neatly on the
paper feed table.
c. Position the paper feed side
plates so that they lightly contact
the paper on both sides.
d. Position the paper delivery table
for the printing paper size, using
the scale on the table.
e. Position the paper delivery side
plate for the printing paper size,
using the scale on the table.
7. Installing the Master Roll
(Type VT-/-M)
a. While lifting the release lever,
slide the scanner unit to the left.
b. Attach a spool to each end of the
master roll.
c. Set the master roll in the machine.
NOTE: The vinyl side faces down.
d. Return the pressure release lever
to the original position.
e. Plug in the power cord and turn
on the main switch.
f. Press the Master Cut button.
g. Remove the cut master paper.
NOTE: Confirm that the master paper
is not bent or creased.
h. Close the scanner unit.
SM 3-4 C216