Ricoh C211 Service Manual page 393

(Paper Delivery Side)
No.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
26–
25
Name
Master Cut Button
Pressure Release Lever
Drum Rotating Button
Drum Unit
Ink Holder
Main Switch
Wing Guide Release
Lever
Small Size Paper
Delivery End Plate
(for smaller than A4/LT)
Paper Delivery End Plate
(for larger than A4/LT)
Paper Delivery Side Plate
Master Eject Container
Cover
Printing Density Select
Switch
Master Eject Unit Open
Button
Function
Press this button to cut the master paper leading edge
after installing a new master roll.
Used to install the master roll, or to clean the thermal
head.
Press to replace the drum or to remove misfed paper.
The master paper is wrapped around this unit.
Set the ink cartridge in this holder.
Used to turn the power on or off.
Used to aid the paper delivery according to paper
thickness.
Used to align the leading edge of small-sized
(less than A4/LT) prints.
Used to align the leading edge of prints larger than A4/LT
Used to align the prints on the paper delivery table.
Open when removing the master eject container.
Used to select the printing density according to the type
and quality of the original.
Press to remove misfed paper or a misfed master.
1-9