Ricoh C211 Service Manual page 313

2. Printer Selection:
A. PostScript Compatible Printing - DOS:
-
Windows 3.1 applications (Pagemaker, Corel Draw, MS Word for
Windows, etc.) should select "Postscript Printer" for the following
page sizes: Letter, Legal, A4 and B5.
-
WordPerfect 5.1 users should select a "TI Microlaser " for the following
page sizes: Letter, Legal and A4.
-
WordPerfect 5.1 users needing B4 or B5 page sizes should install the
WPPSE1.ALL file (supplied on the 3 1/2" Priport Configuration Disk for
IBM and compatibles) and select "Priport Controller ".
B. PostScript Compatible Printing - Macintosh:
-
Using the pull-down menu from the Apple icon, point and click on
Chooser.
-
Within the Chooser left-hand dialog box, point and click on LaserWriter.
(The Macintosh will then poll the AppleTalk network and return the
Priport name in the right-hand dialog box.)
-
If it is not already selected, you should point and click on Priport now.
When you close the Chooser, the Macintosh is ready to send files to the
Controller from any Macintosh software program. This driver supports the
printing of all possible output page sizes through the Controller; however, you
may be limited by the page size choices within the specific Macintosh
application itself.
C. PCL-5 Compatible Printing - (only applicable for DOS
applications):
All users should select an "HP LaserJet III " printer within their software
application for letter, legal or A-4 page sizes. (Other page sizes are not
available.)
FSM 6-29 VT2105