Table Of Periodic Inspection (Every 12 Months) - Ricoh C211 Service Manual

1.4 TABLE OF PERIODIC INSPECTION (EVERY 12 MONTHS)

Item/Location
Original platen cover
Exposure glass
Fluorescent lamp
Mirror/Sub mirror
Platen roller
Paper feed roller
Separation roller
Sensors
Master delivery rollers
Master delivery belts
Second paper feed
rollers
Press roller
Drum surface
Master feed and
delivery
Paper feed and delivery Inspection
Original transport roller
Lubrication points
ADF
Pull-out roller
Original feed roller
Separation blade
SM
Step
Cleaning Wipe off stains with a soft cloth dampened with
ethyl alcohol.
Cleaning Wipe off stains with a soft cloth dampened with
ethyl alcohol.
Cleaning Wipe with a dry cloth.
Cleaning Use a blower brush.
Cleaning Wipe off paper powder with a cloth dampened
with water.
Cleaning Wipe off paper powder with a cloth dampened
with water and wipe off ink with a cloth dampened
with ethyl alcohol.
Cleaning Wipe off paper powder with a cloth dampened
with water and wipe off ink with a cloth dampened
with ethyl alcohol.
Inspection Check the performance of all the sensors.
and cleaning Wipe off stains on the sensor with a dry cloth.
Cleaning Wipe off built up ink and paper powder on the
master delivery rollers using a cloth dampened
with ethyl alcohol.
Cleaning Wipe off built up ink and paper powder on the
master delivery belts using a cloth dampened with
ethyl alcohol.
Cleaning Wipe off built up ink and paper powder on the
second feed rollers using a cloth dampened with
ethyl alcohol.
Cleaning Wipe off built up ink and paper powder on the
press roller using a cloth dampened with ethyl
alcohol.
Cleaning Wipe off the ink, which is forced out from the
trailing edges of masters, and paper powder
using a cloth dampened with ethyl alcohol.
Inspection The master should be properly fed and clamped
without the generation of skew, folds, etc. The
master should also be properly delivered without
jam.
Print a few sheets of paper to ensure that paper is
fed smoothly and delivered without the generation
of skew, folds, wrinkles, etc.
Cleaning Wipe off paper powder with a cloth dampened
with water.
Lubrication Lubricate the lubrication points as indicated in the
lubrication points list. Refer to section 4.1.
Cleaning Wipe off paper powder with a cloth dampened
with water.
Cleaning Wipe off paper powder with a cloth dampened
with water.
Cleaning Wipe off paper powder with a cloth dampened
with water.
4-3
Inspection Standard
C224