Ricoh C211 Service Manual page 187

n
[D]
VT2100/21 30/2150 Only:
8, Remove the drive gear [A] and the bearing (2 Allen screws).
NOTE: It
is not necessary to remove the drive gear on the VT2300 and the
9.
100
11.
12.
13.
VT2500 because these models use a timing relay belt [B].
Remove the relay gear assembly [C].
Loosen the 2 hexagon bolts [D] and remove the pressure cam drive gear [E].
Remove the timing gear assembly [F].
Remove the belt tension bearings [G] (1 E-ring).
Replace the drum drive belt [H].
5-75