Ricoh C211 Service Manual page 192

10.3 EXIT PAWL CLEARANCE ADJUSTMENT
..- . ----- —..-.----
0.3 -0.5
mm 5
Purpose: To ensure that the printing paper is delivered without paper wrap or
1.
2.
3.
4.
5.
damage to the screen.
Remove the rear cover of the machine.
Manually turn on the paper feed and the printing pressure solenoids,
Using a spanner (1O mm), gradually rotate the drum rotation shaft
counterclockwise to move the exit pawl [A] to the drum.
Make sure that the clearance between the drum and the exit pawl is 0.3 to
0.5 mm when the exit pawl is at the position closest to the drum,
If incorrect, open the master eject box and loosen the hexagon nut [B] of the
exit pawl drive arm, Then adjust the clearance by turning the screw [C].
Check adjustment by repeating steps 2 and 3.
5-80