Ricoh C211 Service Manual page 587

K Disassembly z
1. Paper End Switch
"l-l f----l
1) Raise the paper table
Turn on the power switch while pressing the Print Start key (Start key: 830),
Stop key, and Clear key on the operation panel.
. Enter "O" in the memory display and "4" in the copy counter.
Press the Print Start key (Start key: 830) to raise the paper table to the paper
feed position.
2)
Unplug the connector
[A].
3) Cut the harness tie wrap [B].
4) Remove the paper end switch ass'y [C].
5-47