Ricoh C211 Service Manual page 111

1. The image density is lower than with a type 900 master;
however, the ink set-off on the back
side of the following pages is reduced.
2. The image density is lower than with a type 905 master; however, the ink set-off is reduced.
3. The image density is higher than with a type 905 master and the ink set-off is increased.
4. The image density is lower than with a type 900 master; however, the ink set-off is reduced
and the image density in solid areas is more even,
5. When the 500 cc ink cartridge is installed, the ink holder spacer [A] (P/N C5264633) must be
6,
7,
8.
9.
10,
11.
12.
installed as shown.
The image density is slightly higher.
The drum cannot be used used unless the black seal [B] (P/N C2074550) is a~xedTo t~e
screen edge as shown. The drum lock function cannot be used.
The drum cannot be used unless the black seal [B] (P/N C2074550) is affixed to the screen
edge as shown. The modified master clamper (P/N C2074948) must be installed. The drum
lock function cannot be used.
The drum lock and the drum master detection functions cannot be used; however, the first
few prints made when the Master Making key is pressed will be better than those made on a
standard drum.
The modified master clamper (P/N C2074948) must be installed.
The drum lock and the drum master detection functions cannot be used; however, this drum
produces better quality images than a standard drum.
The rear paper delivery side plate [C] (P/N C21 36119) used on the VT series must be
installed.
[B]
-------------
4-21