Ricoh C211 Service Manual page 400

n
o
2
,.
w [—
(1
(-)
\
J
'an-"---.. _ _________ Q__ QQ__Q
>
I
(-h
1
1. Master Ejecting :
Eject the used master wrapped around the drum into the master
I
eject box.
i
2. Scanning :
Scan the original image by CCD through the mirror and the lens
I
while feeding the original.
I
3. Master Feeding : Convert the image signal read by CCD into the digital signal and
send it to the thermal head to make holes on the surface of the
master and then, set the master around the drum.
I
4. Paper Feeding :
Send paper to the drum section by using a center separation sys-
tem consisting of the separation plate and separation roller.
t
5. Printing :
Press the paper fed from the paper feed section to the drum to
transfer the ink through the drum screen and the master.
t
6. Paper Delivering :
Peel the printed paper off the drum with the Exit Pawl and Air knife and
eject the paper onto the paper delivery table.
1-16