Ricoh C211 Service Manual page 182

9.11 DRUM LOCK SOLENOID ADJUSTMENT:
VT2300/VT2500
.n r-x
*0-0"3m#~
So- OFF Solenoid ON
Purpose: To prevent the drum unit from being removed when it is not at the
1,
2,
3.
4,
5,
original drum position.
Install the drum unit in the machine.
Access 1/0 check mode (See page 4-1 1).
Enter "O"in the memory display and "34" in the copy counter.
Press the Print Start key to turn on the drum lock solenoid [A].
Make sure that the drum lock arm [B] and the stopper [C] are no further than
0.3 mm apart when the solenoid turns on.
If the drum and the stopper are too far apart, loosen the 2 screws [D] and
adjust the drum lock solenoid position.
5-70