Ricoh C211 Service Manual page 575

PAPER FEED SECTION
<Adjustment
B
1. Adjusting The Paper Table Safety Switch
)
(
/""
,
/'
[B]
\
I
Purpose : To ensure that the paper table safety switch turns on to prevent the paper
table from going up when the paper table is closed.
Method :
1. Make sure that the safety switch [A] turns off when the paper table is
opened and that the safety switch [A] turns on when the paper table is
closed. Also, make sure that the distance between the actuator [B] and
the safety switch [A] is 0.3 mm to 0.5 mm when the switch turns on.
2. If incorrect, loosen the screw [C] and adjust the switch bracket position.
3. After adjustment, repeat step 1 again.
4. Also, make sure that the safety switch [A] does not turn on when 1,000
sheets of standard weight paper are placed on the paper table.
5-36