Ricoh C211 Service Manual page 166

8. PRINTING SECTION
8.1 PAPER DETECTING ARM CLEARANCE ADJUSTMENT
Purpose:
1,
2*
3.
4.
5,
To ensure that printing pressure is applied during paper feed, and is
released correctly afterwards.
Remove the rear cover of the machine,
Using a spanner (1O mm), gradually turn the drum rotation shaft
counterclockwise to position the bearing of the pressure release arm [A] on
the top of the pressure cam [B].
Make sure that the clearance between the paper detecting arm [C] and the
pressure release arm is 0.2 to 0.4 mm.
If incorrect, loosen the screws [D] and adjust the clearance by shifting the
paper detecting bracket [E] up or down.
After adjustment, confirm the printing pressure ON/OFF mechanism by
monitoring a print run.
5-54