Ricoh C211 Service Manual page 614

2. Adjusting The Second Paper Exit Sensor
(ss950)
Purpose : To ensure the correct sensor detection
indicator blinks and the machine stops
occurs.
of printing paper, and that the Jam
when a paper wrap or exit misfeed
Method : 1.
2.
3.
Remove the front cover of the machine.
Confirm the following items:
a)
b)
c)
When the shelter plate is removed and the master eject unit is closed
LED 101 (LED 104: SS830) should be OFF.
When the shelter plate is installed and the master eject unit is closed, LED
101 (LED 104: SS830) should be OFF.
When a sheet of paper is positioned over the second paper exit sensor
and is in contact with the shelter plate, LED 101 (LED 104:830) should be
ON.
If incorrect, adjust by turning VRIO1 (VR103: 830) on the main control board
[B] .
5-74